tImpalaLoad properties - 6.3

Talend Open Studio for Big Data Components Reference Guide

EnrichVersion
6.3
EnrichProdName
Talend Open Studio for Big Data
task
Data Governance
Data Quality and Preparation
Design and Development
EnrichPlatform
Talend Studio

Component family

Big Data / Impala

 

Basic settings

Property type

Either Built-in or Repository.

 

 

Built-in: No property data stored centrally.

 

 

Repository: Select the repository file in which the properties are stored. The fields that follow are completed automatically using the data retrieved.

Use an existing connection

Select this check box and in the Component List click the relevant connection component to reuse the connection details you already defined.

Note

When a Job contains the parent Job and the child Job, if you need to share an existing connection between the two levels, for example, to share the connection created by the parent Job with the child Job, you have to:

  1. In the parent level, register the database connection to be shared in the Basic settings view of the connection component which creates that very database connection.

  2. In the child level, use a dedicated connection component to read that registered database connection.

For an example about how to share a database connection across Job levels, see Talend Studio User Guide.

Version

Distribution

Select the cluster you are using from the drop-down list. The options in the list vary depending on the component you are using. Among these options, the following ones requires specific configuration:

  • If available in this Distribution drop-down list, the Microsoft HD Insight option allows you to use a Microsoft HD Insight cluster. For this purpose, you need to configure the connections to the WebHCat service, the HD Insight service and the Windows Azure Storage service of that cluster in the areas that are displayed. A demonstration video about how to configure this connection is available in the following link: https://www.youtube.com/watch?v=A3QTT6VsNoM.

  • If you select Amazon EMR, see the article Amazon EMR - Getting Started on about how to configure the connection on Talend Help Center (https://help.talend.com).

  • The Custom option allows you to connect to a cluster different from any of the distributions given in this list, that is to say, to connect to a cluster not officially supported by Talend.

In order to connect to a custom distribution, once selecting Custom, click the button to display the dialog box in which you can alternatively:

  1. Select Import from existing version to import an officially supported distribution as base and then add other required jar files which the base distribution does not provide.

  2. Select Import from zip to import the configuration zip for the custom distribution to be used. This zip file should contain the libraries of the different Hadoop elements and the index file of these libraries.

    In Talend Exchange, members of Talend community have shared some ready-for-use configuration zip files which you can download from this Hadoop configuration list and directly use them in your connection accordingly. However, because of the ongoing evolution of the different Hadoop-related projects, you might not be able to find the configuration zip corresponding to your distribution from this list; then it is recommended to use the Import from existing version option to take an existing distribution as base to add the jars required by your distribution.

    Note that custom versions are not officially supported by Talend. Talend and its community provide you with the opportunity to connect to custom versions from the Studio but cannot guarantee that the configuration of whichever version you choose will be easy, due to the wide range of different Hadoop distributions and versions that are available. As such, you should only attempt to set up such a connection if you have sufficient Hadoop experience to handle any issues on your own.

    Note

    In this dialog box, the active check box must be kept selected so as to import the jar files pertinent to the connection to be created between the custom distribution and this component.

    For a step-by-step example about how to connect to a custom distribution and share this connection, see Connecting to a custom Hadoop distribution.

 

Impala version

Select the version of the Hadoop distribution you are using. The available options vary depending on the component you are using. Along with the evolution of Hadoop, please note the following changes:

  • If you use Hortonworks Data Platform V2.2, the configuration files of your cluster might be using environment variables such as ${hdp.version}. If this is your situation, you need to set the mapreduce.application.framework.path property in the Hadoop properties table of this component with the path value explicitly pointing to the MapReduce framework archive of your cluster. For example:

    mapreduce.application.framework.path=/hdp/apps/2.2.0.0-2041/mapreduce/mapreduce.tar.gz#mr-framework
  • If you use Hortonworks Data Platform V2.0.0, the type of the operating system for running the distribution and a Talend Job must be the same, such as Windows or Linux. Otherwise, you have to use Talend Jobserver to execute the Job in the same type of operating system in which the Hortonworks Data Platform V2.0.0 distribution you are using is run. For further information about Talend Jobserver, see the Talend Installation and Upgrade Guide.

 

Host

Database server IP address.

 

Port

Listening port number of DB server.

 

Database

Fill this field with the name of the database.

 

Username

DB user authentication data.

Authentication

Use kerberos authentication

If you are accessing an Impala system running with Kerberos security, select this check box and then enter the Kerberos principal of this Impala system.

  • If this cluster is a MapR cluster of the version 4.0.1 or later, you can set the MapR ticket authentication configuration in addition or as an alternative by following the explanation in Connecting to a security-enabled MapR.

    Keep in mind that this configuration generates a new MapR security ticket for the username defined in the Job in each execution. If you need to reuse an existing ticket issued for the same username, leave both the Force MapR ticket authentication check box and the Use Kerberos authentication check box clear, and then MapR should be able to automatically find that ticket on the fly.

This check box is available depending on the Hadoop distribution you are connecting to.

 

Load action

Select the action you need to carry for writing data into the specified destination.

  • When you select LOAD, you are moving or copying data from a directory you specify.

  • When you select INSERT, you are moving or copying data based on queries.

 

Target type

This drop-down list appears only when you have selected INSERT from the Load action list.

Select from this list the type of the location you need to write data in.

  • If you select Table as destination, you can still choose to append data to or overwrite the contents in the specified table. This is the only option in the current release.

 

Action

Select whether you want to OVERWRITE the old data already existing in the destination or only APPEND the new data to the existing one.

 

Table name

Enter the name of the Hive table you need to write data in.

Note that with the INSERT action, this field is available only when you have selected Table from the Target type list.

 

File path

Enter the directory you need to read data from.

 

Query

This field appears when you have selected INSERT from the Load action list.

Enter the appropriate query for selecting the data to be exported to the specified Impala table or directory.

  Set partitions

Select this check box to use the Impala Partition clause in loading or inserting data in a Impala table. You need to enter the partition keys and their values to be used in the field that appears.

For example, enter contry='US', state='CA'. This makes a partition clause reading Partition (contry='US', state='CA'), that is to say, a US and CA partition.

Also, it is recommended to select the Create partition if not exist check box that appears to ensure that you will not create a duplicate partition.

 

Die on error

Select this check box to kill the Job when an error occurs.

  Advanced settings

tStatCatcher Statistics

Select this check box to collect log data at the component level.

Dynamic settings

Click the [+] button to add a row in the table and fill the Code field with a context variable to choose your database connection dynamically from multiple connections planned in your Job. This feature is useful when you need to access database tables having the same data structure but in different databases, especially when you are working in an environment where you cannot change your Job settings, for example, when your Job has to be deployed and executed independent of Talend Studio.

The Dynamic settings table is available only when the Use an existing connection check box is selected in the Basic settings view. Once a dynamic parameter is defined, the Component List box in the Basic settings view becomes unusable.

For examples on using dynamic parameters, see Scenario 3: Reading data from MySQL databases through context-based dynamic connections and Scenario: Reading data from different MySQL databases using dynamically loaded connection parameters. For more information on Dynamic settings and context variables, see Talend Studio User Guide.

Global Variables

QUERY: the query statement being processed. This is a Flow variable and it returns a string.

ERROR_MESSAGE: the error message generated by the component when an error occurs. This is an After variable and it returns a string. This variable functions only if the Die on error check box is cleared, if the component has this check box.

A Flow variable functions during the execution of a component while an After variable functions after the execution of the component.

To fill up a field or expression with a variable, press Ctrl + Space to access the variable list and choose the variable to use from it.

For further information about variables, see Talend Studio User Guide.

Usage

This component works standalone.

Prerequisites

The Hadoop distribution must be properly installed, so as to guarantee the interaction with Talend Studio. The following list presents MapR related information for example.

  • Ensure that you have installed the MapR client in the machine where the Studio is, and added the MapR client library to the PATH variable of that machine. According to MapR's documentation, the library or libraries of a MapR client corresponding to each OS version can be found under MAPR_INSTALL\ hadoop\hadoop-VERSION\lib\native. For example, the library for Windows is \lib\native\MapRClient.dll in the MapR client jar file. For further information, see the following link from MapR: http://www.mapr.com/blog/basic-notes-on-configuring-eclipse-as-a-hadoop-development-environment-for-mapr.

    Without adding the specified library or libraries, you may encounter the following error: no MapRClient in java.library.path.

  • Set the -Djava.library.path argument, for example, in the Job Run VM arguments area of the Run/Debug view in the [Preferences] dialog box in the Window menu. This argument provides to the Studio the path to the native library of that MapR client. This allows the subscription-based users to make full use of the Data viewer to view locally in the Studio the data stored in MapR.

For further information about how to install a Hadoop distribution, see the manuals corresponding to the Hadoop distribution you are using.