Denodo Virtual DataPort - Import
Bridge Requirements
This bridge:requires Internet access to https://repo.maven.apache.org/maven2/ and/or other tool sites to download drivers into <TDC_HOME>/data/download/MIMB/.
Bridge Specifications
Vendor | Denodo |
Tool Name | Denodo Virtual DataPort |
Tool Version | 6.0 to 8.0 |
Tool Web Site | https://www.denodo.com/ |
Supported Methodology | [Relational Database] Multi-Model, Data Store (Physical Data Model, Stored Procedure Expression Parsing) via JDBC API |
Data Profiling | ![]() |
Incremental Harvesting | ![]() |
Multi-Model Harvesting | ![]() |
Remote Repository Browsing for Model Selection | ![]() |
SPECIFICATIONS
Tool: Denodo / Denodo Virtual DataPort version 6.0 to 8.0 via JDBC API
See https://www.denodo.com/
Metadata: [Relational Database] Multi-Model, Data Store (Physical Data Model, Stored Procedure Expression Parsing)
Component: Denodo version 11.2.0
DISCLAIMER
This import bridge requires internet access to download third-party libraries:
- such as https://repo.maven.apache.org/maven2/ to download open source third-party libraries,
- and more sites for other third-party software such as database specific JDBC drivers.
The downloaded third-party libraries are stored into $HOME/data/download/MIMB/
- If HTTPS fails, the import bridge then tries with HTTP.
- If a proxy is used to access internet, you must configure that proxy in the JRE (see the -j option in the Miscellaneous parameter).
- If the import bridge does not have full access to internet, that $HOME/data/download/MIMB/ directory can be copied from another server with internet access where the command $HOME/bin/MIMB.sh (or .bat) -d can be used to download all third-party libraries used by all bridges at once.
By running this import bridge, you hereby acknowledge responsibility for the license terms and any potential security vulnerabilities from these downloaded third-party software libraries.
OVERVIEW
Imports metadata from a DENODO Platform using JDBC.
The import bridge imports the following data sources and views:
- data sources: JDBC, delimited file (data route: Local)
- views: base view, materialized view, derived views (join view, union view, minus view, intersection view, selection view, interface view)
REQUIREMENTS
User Privilege Requirements:
You can use any custom read only user with at least the following privileges:
- Connect, Metadata, and Read privileges are required to read metadata
- Admin privilege is required to read metadata about data sources that you did not create/own (without the data source metadata, the Denodo model cannot stitch views to their source models)
- Write privilege is required for Denodo version 7 (or newer) to obtain the SQL used to create a view (to execute the command DESC VQL VIEW etc.)
Java Requirements:
You may need to use the Miscellaneous parameter to specify a Java environment supported by Denodo Virtual DataPort, if the default JVM is not compatible (OpenJDK 11 instead of Oracle JVM 8) (e.g. -jre "c:\Program Files\Java\jre1.8.0_211\bin\javaw.exe").
FREQUENTLY ASKED QUESTIONS
Q: What Denodo patches must be applied?
A: For Denodo Platform 6.0 only, you must apply patch 20171205 or newer.
LIMITATIONS
Refer to the current general known limitations at MIMB Known Limitations or bundled in Documentation/ReadMe/MIMBKnownLimitations.html
SUPPORT
Provide a troubleshooting package with:
- the debug log (can be set in the UI or in conf/conf.properties with MIR_LOG_LEVEL=6)
- the metadata backup if available (can be set in the Miscellaneous parameter with -backup option, although this common option is not implemented on all bridges for technical reasons).
Bridge Parameters
Parameter Name | Description | Type | Values | Default | Scope |
Driver location | This parameter is optional. The JDBC driver located in the directory <DENODO_HOME>/tools/client-drivers/jdbc/denodo-vdp-jdbcdriver.jar The 'com.denodo.vdp.jdbc.Driver' JDBC driver with the 'Denodo Native Driver' name is required. |
DIRECTORY | |||
JDBC connection URL | Syntax of the JDBC connection URL: jdbc:vdb://<hostName>:<port>/<databaseName>[?<paramName>=<paramValue> [&<paramName>=<paramValue>]* ] The name of the database is mandatory. For example: JDBC connection URL sample jdbc:vdb://localhost:9999/admin?queryTimeout=100000&chunkTimeout=1000&userAgent=myApplication&autoCommit=true If the name of the database contains non-ASCII characters, they have to be URL-encoded, e.g. The name of the database is "test", the connection URL to the database will be the following: jdbc:vdb://localhost:9999/%E3%83%86%E3%82%B9%E3%83%88?queryTimeout=900000&chunkTimeout=1000&userAgent=myApplication&autoCommit=true |
STRING | Mandatory | ||
User | The database user name on whose behalf the connection is being made. | STRING | |||
Password | The database user's password on whose behalf the connection is being made. | PASSWORD | |||
Database | Name of the database you would like to import. | REPOSITORY_SUBSET | |||
Views | Views you would like to import. When this parameter is empty all available non-system Views are imported. Use semicolons to separate View names in the list (e.g. view1;view2). You can specify view name patterns using '%', '_' or 'NOT' keywords. '%': represents a segment of text of any length, including an empty text. '_': represents any character (only one character). Patterns support inclusions and exclusions, e.g. "A%; %B; %C%; D" that tries to get view names that: - start with A or - end with B or - contain C or - equal D To exclude a pattern, prefix it with 'NOT', e.g. "A%; NOT %test" This imports views with name started with 'A' and not ended with 'test' |
STRING | |||
Miscellaneous | INTRODUCTION Specify miscellaneous options starting with a dash and optionally followed by parameters, e.g. -connection.cast MyDatabase1="MICROSOFT SQL SERVER" Some options can be used multiple times if applicable, e.g. -connection.rename NewConnection1=OldConnection1 -connection.rename NewConnection2=OldConnection2; As the list of options can become a long string, it is possible to load it from a file which must be located in ${MODEL_BRIDGE_HOME}\data\MIMB\parameters and have the extension .txt. In such case, all options must be defined within that file as the only value of this parameter, e.g. ETL/Miscellaneous.txt JAVA ENVIRONMENT OPTIONS -java.memory <Java Memory's maximum size> (previously -m) 1G by default on 64bits JRE or as set in conf/conf.properties, e.g. -java.memory 8G -java.memory 8000M -java.parameters <Java Runtime Environment command line options> (previously -j) This option must be the last one in the Miscellaneous parameter as all the text after -java.parameters is passed "as is" to the JRE, e.g. -java.parameters -Dname=value -Xms1G The following option must be set when a proxy is used to access internet (this is critical to access https://repo.maven.apache.org/maven2/ and exceptionally a few other tool sites) in order to download the necessary third-party software libraries. Note: The majority of proxies are concerned with encrypting (HTTPS) the outside (of the company) traffic and trust the inside traffic that can access proxy over HTTP. In this case, an HTTPS request reaches the proxy over HTTP where the proxy HTTPS-encrypts it. -java.parameters -java.parameters -Dhttp.proxyHost=127.0.0.1 -Dhttp.proxyPort=3128 -Dhttp.proxyUser=user -Dhttp.proxyPassword=pass MODEL IMPORT OPTIONS -model.name <model name> Override the model name, e.g. -model.name "My Model Name" -prescript <script name> This option allows running a script before the bridge execution. The script must be located in the bin directory (or as specified with M_SCRIPT_PATH in conf/conf.properties), and have .bat or .sh extension. The script path must not include any parent directory symbol (..). The script should return exit code 0 to indicate success, or another value to indicate failure. For example: -prescript "script.bat arg1 arg2" -postscript <script name> This option allows running a script after successful execution of the bridge. The script must be located in the bin directory (or as specified with M_SCRIPT_PATH in conf/conf.properties), and have .bat or .sh extension. The script path must not include any parent directory symbol (..). The script should return exit code 0 to indicate success, or another value to indicate failure. For example: -postscript "script.bat arg1 arg2" -cache.clear Clears the cache before the import, and therefore will run a full import without incremental harvesting. If the model was not changed and the -cache.clear parameter is not used (incremental harvesting), then a new version will not be created. If the model was not changed and the -cache.clear parameter is set (full source import instead of incremental), then a new version will be created. -backup <directory> This option allows to save the bridge input metadata for further troubleshooting. The provided <directory> must be empty. The primary use of this option is for data store import bridges, in particular JDBC based database import bridges. Note that this option is not operational on some bridges including: - File based import bridges (as such input files can be used instead) - DI/BI repository import bridges (as the tool's repository native backup can be used instead) - Some API based import bridges (e.g. COM based) for technical reasons. DATA CONNECTION OPTIONS Data Connections are produced by the import bridges typically from ETL/DI and BI tools to refer to the source and target data stores they use. These data connections are then used by metadata management tools to connect them (metadata stitching) to their actual data stores (e.g. databases, file system, etc.) in order to produce the full end to end data flow lineage and impact analysis. The name of each data connection is unique by import model. The data connection names used within DI/BI design tools are used when possible, otherwise connection names are generated to be short but meaningful such as the database / schema name, the file system path, or Uniform Resource Identifier (URI). The following option allows to manipulate connections. These options replaces the legacy options -c, -cd, and -cs. -connection.cast ConnectionName=ConnectionType Casts a generic database connection (e.g. ODBC/JDBC) to a precise database type (e.g. ORACLE) for SQL Parsing, e.g. -connection.cast "My Database"="MICROSOFT SQL SERVER". The list of supported data store connection types includes: ACCESS APACHE CASSANDRA DB2/UDB DENODO GOOGLE BIGQUERY HIVE MYSQL NETEZZA ORACLE POSTGRESQL PRESTO REDSHIFT SALESFORCE SAP HANA SNOWFLAKE MICROSOFT SQL AZURE MICROSOFT SQL SERVER SYBASE SQL SERVER SYBASE AS ENTERPRISE TERADATA VECTORWISE HP VERTICA -connection.rename OldConnection=NewConnection Renames an existing connection to a new name, e.g. -connection.rename OldConnectionName=NewConnectionName Multiple existing database connections can be renamed and merged into one new database connection, e.g. -connection.rename MySchema1=MyDatabase -connection.rename MySchema2=MyDatabase -connection.split oldConnection.Schema1=newConnection Splits a database connection into one or multiple database connections. A single database connection can be split into one connection per schema, e.g. -connection.split MyDatabase All database connections can be split into one connection per schema, e.g. -connection.split * A database connection can be explicitly split creating a new database connection by appending a schema name to a database, e.g. -connection.split MyDatabase.schema1=MySchema1 -connection.map SourcePath=DestinationPath Maps a source path to destination path. This is useful for file system connections when different paths points to the same object (directory or file). On Hadoop, a process can write into a CSV file specified with the HDFS full path, but another process reads from a Hive table implemented (external) by the same file specified using a relative path with default file name and extension, e.g. -connection.map /user1/folder=hdfs://host:8020/users/user1/folder/file.csv On Linux, a given directory (or file) like /data can be referred to by multiple symbolic links like /users/john and /users/paul, e.g. -connection.map /data=/users/John -connection.map /data=/users/paul On Windows, a given directory like C:\data can be referred to by multiple network drives like M: and N:, e.g. -connection.map C:\data=M:\ -connection.map C:\data=N:\ -connection.casesensitive ConnectionName Overrides the default case insensitive matching rules for the object identifiers inside the specified connection, provided the detected type of the data store by itself supports this configuration (e.g. Microsoft SQL Server, MySql etc.), e.g. -connection.casesensitive "My Database" -connection.caseinsensitive ConnectionName Overrides the default case sensitive matching rules for the object identifiers inside the specified connection, provided the detected type of the data store by itself supports this configuration (e.g. Microsoft SQL Server, MySql etc.), e.g. -connection.caseinsensitive "My Database" -connection.level AggregationLevel Specifies the aggregation level for the external connections, e.g.-connection.level catalog The list of the supported values: server catalog schema (default) DENODO OPTIONS -s Import system objects that are skipped by default. -datasource.double_quotes DataSourceName Interprets the double quoted strings as identifiers in ANSI_QUOTES mode (e.g. MySql etc.). -model.split (previously -multiModel) Splits a large server model into multi models (e.g. one database per model). Warning: this is a system option managed by the application calling this import bridge and should not be set by users. -sources.skip Disables the source dependencies load query. |
STRING |
Bridge Mapping
Mapping information is not available