Skip to main content Skip to complementary content

Tableau Prep Builder - Import

Availability-note AWS

Bridge Requirements

This bridge:
  • requires Internet access to https://repo.maven.apache.org/maven2/ and/or other tool sites to download drivers into <TDC_HOME>/data/download/MIMB/.

Bridge Specifications

Vendor Tableau
Tool Name Tableau Prep Builder
Tool Version 8.x to 2023.x
Tool Web Site https://www.tableau.com/products/prep
Supported Methodology [Data Integration] Multi-Model, Data Store (Physical Data Model, Logical Data Model, Stored Procedure Expression Parsing), ETL (Source and Target Data Stores, Transformation Lineage, Expression Parsing), Graphical Layout via GraphiQL API
Data Profiling
Incremental Harvesting
Multi-Model Harvesting
Remote Repository Browsing for Model Selection

SPECIFICATIONS
Tool: Tableau / Tableau Prep Builder version 8.x to 2023.x via GraphiQL API
See https://www.tableau.com/products/prep
Metadata: [Data Integration] Multi-Model, Data Store (Physical Data Model, Logical Data Model, Stored Procedure Expression Parsing), ETL (Source and Target Data Stores, Transformation Lineage, Expression Parsing), Graphical Layout
Component: TableauPrep version 11.2.0

DISCLAIMER
This import bridge requires internet access to download third-party libraries:
- such as https://repo.maven.apache.org/maven2/ to download open source third-party libraries,
- and more sites for other third-party software such as database specific JDBC drivers.

The downloaded third-party libraries are stored into $HOME/data/download/MIMB/
- If HTTPS fails, the import bridge then tries with HTTP.
- If a proxy is used to access internet, you must configure that proxy in the JRE (see the -j option in the Miscellaneous parameter).
- If the import bridge does not have full access to internet, that $HOME/data/download/MIMB/ directory can be copied from another server with internet access where the command $HOME/bin/MIMB.sh (or .bat) -d can be used to download all third-party libraries used by all bridges at once.

By running this import bridge, you hereby acknowledge responsibility for the license terms and any potential security vulnerabilities from these downloaded third-party software libraries.

OVERVIEW
This import bridge imports Data Integration (DI) metadata from Tableau Prep Flows deployed on Tableau Server

REQUIREMENTS
n/a

FREQUENTLY ASKED QUESTIONS
n/a

LIMITATIONS
Refer to the current general known limitations at http://metaintegration.com/Products/MIMB/MIMBKnownLimitations.html or bundled in Documentation/ReadMe/MIMBKnownLimitations.html

If your import is missing connections, this may occur because a Hyper file has been embedded directly into a workbook.
In order to create the missing connection(s), you need to create a shared data source connected to the Hyper file. Then, the Server import would create an appropriate connection, thus enabling the import with the "Tableau Server Extract (Hyper) Data Store".

SUPPORT
Provide a troubleshooting package with:
- the debug log (can be set in the UI or in conf/conf.properties with MIR_LOG_LEVEL=6)
- the metadata backup if available (can be set in the Miscellaneous parameter with -backup option, although this common option is not implemented on all bridges for technical reasons).


Bridge Parameters

Parameter Name Description Type Values Default Scope
Server The Tableau Server URL (by default http://localhost:80)
or IP address (e.g. 192.168.0.2)
If SSL is used, the URL must start by https (and possibly end with a custom port if the SSL default port of 443 is not used).
STRING   http://localhost:80 Mandatory
Site The Tableau Site is only required when connecting to an online Tableau server with multiple sites installed.
The value is case sensitive, and must not contain any space as it is used in the URL to connect to Tableau.
STRING      
User Name The Tableau user name used by this bridge.
The user specified must have proper access rights to read all metadata. It is recommended to try as Administrator first (all bridges are warrantied to be ready only and only extract metadata) and possibly on a subset of the metadata. Once successful, a user with only the necessary access rights can be used.

User account must be licensed as 'Interactor' (renamed to 'Explorer' in the latest versions) on the Tableau Server and must have 'View' and 'Download' rights for all of the Workbooks, Data Sources and Projects that he/she is about to import. It is however preferable to use an account that has 'Site Administrator' security role.
STRING      
Password The Tableau user password. PASSWORD      
Personal Access Token Name The Tableau Personal Access Token is long-lived authentication token that allow users to run automation with Tableau REST APIs without requiring hard-coded credentials or interactive login. STRING      
Personal Access Token Secret The Tableau Personal Access Token is long-lived authentication token that allow users to run automation with Tableau REST APIs without requiring hard-coded credentials or interactive login. PASSWORD      
Projects, Flows The subset of repository objects (Projects, Flows) to import. REPOSITORY_SUBSET      
Miscellaneous INTRODUCTION
Specify miscellaneous options starting with a dash and optionally followed by parameters, e.g.
-connection.cast MyDatabase1="MICROSOFT SQL SERVER"
Some options can be used multiple times if applicable, e.g.
-connection.rename NewConnection1=OldConnection1 -connection.rename NewConnection2=OldConnection2;
As the list of options can become a long string, it is possible to load it from a file which must be located in ${MODEL_BRIDGE_HOME}\data\MIMB\parameters and have the extension .txt. In such case, all options must be defined within that file as the only value of this parameter, e.g.
ETL/Miscellaneous.txt

JAVA ENVIRONMENT OPTIONS
-java.memory <Java Memory's maximum size> (previously -m)

1G by default on 64bits JRE or as set in conf/conf.properties, e.g.
-java.memory 8G
-java.memory 8000M

-java.parameters <Java Runtime Environment command line options> (previously -j)

This option must be the last one in the Miscellaneous parameter as all the text after -java.parameters is passed "as is" to the JRE, e.g.
-java.parameters -Dname=value -Xms1G
The following option must be set when a proxy is used to access internet (this is critical to access https://repo.maven.apache.org/maven2/ and exceptionally a few other tool sites) in order to download the necessary third-party software libraries.
Note: The majority of proxies are concerned with encrypting (HTTPS) the outside (of the company) traffic and trust the inside traffic that can access proxy over HTTP. In this case, an HTTPS request reaches the proxy over HTTP where the proxy HTTPS-encrypts it.
-java.parameters -java.parameters -Dhttp.proxyHost=127.0.0.1 -Dhttp.proxyPort=3128 -Dhttp.proxyUser=user -Dhttp.proxyPassword=pass

MODEL IMPORT OPTIONS
-model.name <model name>

Override the model name, e.g.
-model.name "My Model Name"

-prescript <script name>

This option allows running a script before the bridge execution.
The script must be located in the bin directory (or as specified with M_SCRIPT_PATH in conf/conf.properties), and have .bat or .sh extension.
The script path must not include any parent directory symbol (..).
The script should return exit code 0 to indicate success, or another value to indicate failure.
For example:
-prescript "script.bat arg1 arg2"

-postscript <script name>

This option allows running a script after successful execution of the bridge.
The script must be located in the bin directory (or as specified with M_SCRIPT_PATH in conf/conf.properties), and have .bat or .sh extension.
The script path must not include any parent directory symbol (..).
The script should return exit code 0 to indicate success, or another value to indicate failure.
For example:
-postscript "script.bat arg1 arg2"

-cache.clear

Clears the cache before the import, and therefore will run a full import without incremental harvesting.

If the model was not changed and the -cache.clear parameter is not used (incremental harvesting), then a new version will not be created.
If the model was not changed and the -cache.clear parameter is set (full source import instead of incremental), then a new version will be created.

-backup <directory>

This option allows to save the bridge input metadata for further troubleshooting. The provided <directory> must be empty.

The primary use of this option is for data store import bridges, in particular JDBC based database import bridges.

Note that this option is not operational on some bridges including:
- File based import bridges (as such input files can be used instead)
- DI/BI repository import bridges (as the tool's repository native backup can be used instead)
- Some API based import bridges (e.g. COM based) for technical reasons.

DATA CONNECTION OPTIONS
Data Connections are produced by the import bridges typically from ETL/DI and BI tools to refer to the source and target data stores they use. These data connections are then used by metadata management tools to connect them (metadata stitching) to their actual data stores (e.g. databases, file system, etc.) in order to produce the full end to end data flow lineage and impact analysis. The name of each data connection is unique by import model. The data connection names used within DI/BI design tools are used when possible, otherwise connection names are generated to be short but meaningful such as the database / schema name, the file system path, or Uniform Resource Identifier (URI). The following option allows to manipulate connections. These options replaces the legacy options -c, -cd, and -cs.

-connection.cast ConnectionName=ConnectionType

Casts a generic database connection (e.g. ODBC/JDBC) to a precise database type (e.g. ORACLE) for SQL Parsing, e.g.
-connection.cast "My Database"="MICROSOFT SQL SERVER".
The list of supported data store connection types includes:
ACCESS
APACHE CASSANDRA
DB2/UDB
DENODO
GOOGLE BIGQUERY
HIVE
MYSQL
NETEZZA
ORACLE
POSTGRESQL
PRESTO
REDSHIFT
SALESFORCE
SAP HANA
SNOWFLAKE
MICROSOFT SQL AZURE
MICROSOFT SQL SERVER
SYBASE SQL SERVER
SYBASE AS ENTERPRISE
TERADATA
VECTORWISE
HP VERTICA

-connection.rename OldConnection=NewConnection

Renames an existing connection to a new name, e.g.
-connection.rename OldConnectionName=NewConnectionName
Multiple existing database connections can be renamed and merged into one new database connection, e.g.
-connection.rename MySchema1=MyDatabase -connection.rename MySchema2=MyDatabase

-connection.split oldConnection.Schema1=newConnection

Splits a database connection into one or multiple database connections.
A single database connection can be split into one connection per schema, e.g.
-connection.split MyDatabase
All database connections can be split into one connection per schema, e.g.
-connection.split *
A database connection can be explicitly split creating a new database connection by appending a schema name to a database, e.g.
-connection.split MyDatabase.schema1=MySchema1

-connection.map SourcePath=DestinationPath

Maps a source path to destination path. This is useful for file system connections when different paths points to the same object (directory or file).
On Hadoop, a process can write into a CSV file specified with the HDFS full path, but another process reads from a Hive table implemented (external) by the same file specified using a relative path with default file name and extension, e.g.
-connection.map /user1/folder=hdfs://host:8020/users/user1/folder/file.csv
On Linux, a given directory (or file) like /data can be referred to by multiple symbolic links like /users/john and /users/paul, e.g.
-connection.map /data=/users/John -connection.map /data=/users/paul
On Windows, a given directory like C:\data can be referred to by multiple network drives like M: and N:, e.g.
-connection.map C:\data=M:\ -connection.map C:\data=N:\

-connection.casesensitive ConnectionName

Overrides the default case insensitive matching rules for the object identifiers inside the specified connection, provided the detected type of the data store by itself supports this configuration (e.g. Microsoft SQL Server, MySql etc.), e.g.
-connection.casesensitive "My Database"

-connection.level AggregationLevel

Specifies the aggregation level for the external connections, e.g.-connection.level catalog
The list of the supported values:
server
catalog
schema (default)

TABLEAU PREP OPTIONS
STRING      

 

Bridge Mapping

Mapping information is not available

Did this page help you?

If you find any issues with this page or its content – a typo, a missing step, or a technical error – let us know how we can improve!